Not your question?
Ask your question
View similar questions
Check out some similar questions!
Wood privacy fence with steel (metal) fence
[ 3 Answers ]
Hi, We are planning to put in a 6' wood privacy fence on the sides of our property. We would like to install a metal (steel posing as wrought iron) fence across the front at a later date. My understanding is the terminal metal fence posts would be directly beside but not attached to the terminal...
Electric stove install wire size/type
[ 4 Answers ]
I am installing a Peerless electric stove the plate on it says " Three wire 120/208 volt 60 cycle ac , wattage 8800. I have a GE powermark gold loadcenter with about 10 empty blanks for breakers. The loadcenter is about 75 to 80 feet from the stove location. What size/type wire should I use? What...
Need to install electric dryer but.
[ 11 Answers ]
I have an old GE TM1010 panel which only two spaces available from the same hot bus bar. My question is would I be better off installing two tandem breakers in order to free up a space for a 30A double pole CB or to install a subpanel. Specific info: House is just under 2000 square feet. ...
Invisible dog fence electric use
[ 3 Answers ]
Hi, our invisble dog fence is rated "12V, 850mA" How do I figure out how much electricity this fence is using/unit time when it's on? Thanks much. View more questions Search
|