Ask Experts Questions for FREE Help !
Ask
    par5nto's Avatar
    par5nto Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 14, 2007, 07:11 AM
    Murray Stalls Upon Clutch Release
    My Murray tractor stalls when I release the clutch. I tried to adjust the clutch but that did not help. Any ideas.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 14, 2007, 07:53 AM
    You may need to check all of the safety switches starting with the seat. The switch may be telling the engine that no one is seated on the tractor so it kills the engine. There is a switch for the blade engagement and the cltch/ brake too. Flip up the seat and follow the two wires to the switch, use a continuity tester to see if it is open when not seated and closed when seated.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Sep 14, 2007, 06:45 PM
    ballengerb1 you got it dude, sounds like the problem to me.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray ride on mower (425014x92a) bogs/stalls [ 1 Answers ]

When engaging the blade to cut, with the throttle on high, the mower comes to a practical stall. To keep it from stalling I have to quickly disengage the blade. I've checked two brake pads and they both release when the blade is engaged and they clamp the belt when disengaged. The belt seems a...

Release to another state from Iowa work release [ 5 Answers ]

My dad put in a transfer to Florida as he is in Iowa work release about a month ago, how long should it take? I can't wait to see him... They said Des Moines already approved it... Please help Sheena:confused:

94 skylark stalls [ 1 Answers ]

I have a 94 Buick Skylark which has started stalling when I come to a stop. It only does it after maintaining a constant speed (hiway and such) and come to a complete stop. After it stops it stutters and dies. It will start right back in either park or neutral, but when shifted into a "movement"...

View more questions Search