Ask Experts Questions for FREE Help !
Ask
    scouter5's Avatar
    scouter5 Posts: 7, Reputation: 2
    New Member
    		  
    #1

    Sep 13, 2007, 10:37 PM
    Dryer no go
    Electric dryer has new thermal fuse, control thermostat, high limit thermostat, and the door actuator checks good. The final load stopped when using Auto Perma Press. The lint had collected excessively near the blower. All is clean now. Still the dryer won't start. Has power to it. scouter5.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Sep 14, 2007, 01:39 AM
    Check the thermal fuse for continuity again. I have gotten bad ones from the parts house. You do have the wires internally hooked back up, correct?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Converting a gas dryer into a propane dryer [ 1 Answers ]

I have a GE gas dryer model number dvlr223gt1ww. I need to know what I need to do to convert that into a propane dryer. Please help out. Thank you:confused:

4 prong plug for dryer - new dryer installation [ 3 Answers ]

We are installing a new dryer with a 220 volt 4 prong plug, old dryer had only 3 prongs How is the house wiring attached to new receptacle? cgfryar

Dryer dial won't spin and dryer won't shut off [ 2 Answers ]

Kenmore 90 series dyer... where ever you set the timer dial, it stays put and never shuts off automatically. You have to turn if off manually. The dryer ran all night last night and continues to have the problem today. My question... can we fix the dial ourselves or do we need a repair guy? And...

Electric Dryer verus Gas Dryer [ 2 Answers ]

I have a Kenmore Electric Dryer. It seems to take much longer to dry than my old Kenmore Gas Dryer. Is that natural for electric to take longer, thanks

View more questions Search