Ask Experts Questions for FREE Help !
Ask
    hccarson's Avatar
    hccarson Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 12, 2007, 06:48 PM
    How do I remove a one handle shower know to tile?
    Find Delta Shower Fixture, Chrome and other Faucets at Aubuchon Hardware

    I am tiling my tub and I need to remove a one handle shower knob that is very similar to this link. I can't figure out how to get the handle off. I also don't know how to attach a picture of the real handle which would probably help explain my problem. If anyone knows I would greatly appreciate the help. Thanks.
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #2

    Sep 13, 2007, 07:47 AM
    Look under the handle for a set screw, probably an allen type but could be a slotted screwdriver type.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove stubborn grout from tile surface [ 15 Answers ]

Good Evening. I recently laid a really nice porcelain floor in my new basement washroom. In my haste, I did not fully clean the grout off the surface of the tiles, and had not had time to go back to it for several days. This tile is not smooth and the grout has managed to lodge itslef firmly...

Removing handle from a Moen single-handle shower [ 5 Answers ]

The shower is dripping and I am trying to get to the stem by removing the handle. I can see a set screw recessed into the bottom of the handle. I have tried an allen wrench but bent it without any success.

How to remove ceramic tile removed from concrete floor [ 3 Answers ]

There is a 3'x4' area of ceramic tile at the base of my stairwell between living and dining areas. Laminate flooring will be laid. Is it necessary to remove the small area of tile? Or, can laminate flooring be laid over it? If it needs to be removed what is the simplest way? :(

How do you remove ceramic fireplace tile front? [ 1 Answers ]

We are in the process of restoring a circ 1890 Victorian house; today’s subject is CERAMIC FIREPLACE FRONTS. The tiles used are Trent, about 3” long by 1.5” wide. There are a few missing but we have a plan that we can live with. The wall, that the tile is mounted on, has deteriorated and many...

Replace concre-tile shower with new shower pan [ 1 Answers ]

I am replacing my concrete-tile shower with swanstone 32x60L shower base. The new drain location will be around 4" away from the original drain location. What should I do? Can I use the existing P-trap with the new drain location by connecting them using a horizontal PVC pipe? Or do I have to...

View more questions Search