Ask Experts Questions for FREE Help !
Ask
    Lacygracey's Avatar
    Lacygracey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2007, 03:29 PM
    I wan't my ex back
    My ex boyfriend and I broke up about 2 years ago and I broke up with him but this summer I started liking him again I asked him if he wanted to go back out but he said he didn't want to deal with the pain again how do I get him back I want to tell him that its better to have loved and lost then to have never loved at all!
    mckenzie134's Avatar
    mckenzie134 Posts: 647, Reputation: 67
    Senior Member
    		  
    #2

    Sep 11, 2007, 11:32 PM
    Why did you break up in the first place then and why did you start liking him again??
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Low cold water pressure in 2 showers... Not back to back config however [ 8 Answers ]

My home is 16 years old, I've had it for 5 years. I am on a pump - with 70LBS high cutoff and 55lbs Low turn on. All copper - I have 2 Delta 1600 shower faucets - one tub spicket with shower diverter - one shower only. The tub/shower combo has allways had only a trickle of cold water and...

I wan't to be pregnant.I hope this is it. [ 11 Answers ]

Hello ladies... I posted earlier this week and I am back again with follow up... I ovulated on 8/22/07, had intercourse on the 23rd 24th and thereafter... on 10dpo I experienced brown/pink spotting for about 3 days no pad needed... but a liner was sufficient.. my AF was due on this tues 4th and I...

2 periods back to back with large blood clots! [ 6 Answers ]

I have just stared yet another period after just ending one 5 days ago. I had major pain with the last one, I have never had that kind of pain before. Now with this period I just found an extremely large blood clot. Although it looked more like tissue then an actual bllod clot. What could this be...

Plumbing back to back shower valves [ 5 Answers ]

I am plumbing 2 showers that share a wall (back to back). In order to get the hot and cold supplies to the proper side of each valve requires lots of twists and turns. I was advised by someone to just use ½” male threaded connectors on the supply lines (sweat fit to copper) and then simply use...

Interlocking plate back to back feed [ 2 Answers ]

If I use a interlocking plate to backfeed my main(homelite 200amp)from my generator... from my garage... can I use the braker that is feeding the garage if I put it in the proper place to accommodate the interlocking plate? It's a 220 30 amp braker... so part of the question is... will the...

View more questions Search