Ask Experts Questions for FREE Help !
Ask
    puller's Avatar
    puller Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2007, 08:06 AM
    Briggs twin modification
    I'm looking for someone with knowledge of modifcation of the briggs 16-18 flathead series. We want to use them for tractor pulling in a cub cadet chassis:D
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Sep 12, 2007, 09:36 AM
    Sorry, not much of one to be able to assist in the modifications you are wishing to do. Check with a race shop supplier.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs V Twin 20HP [ 2 Answers ]

Hi, I have a Farm and Fleet garden tractor with a Briggs 20 HP V Twin engine. It started running lean recently. If you run at 3/4 choke, it runs OK. But will not run past idle when warm and the choke opened. I noticed the fuel filter bowl seemed almost empty. I replaced the pump thinking it...

Briggs 18 twin [ 1 Answers ]

I have a MG Ward 18/42 Briggs twin, Having oil seeping from what appears to be the left cylinder base. Is the Jug removable or cast into the main block. Cylinder head looks easy enough to remove but the problem appears low end. Thanks rirog

16.5 I/c Briggs Twin engine problem [ 10 Answers ]

After rebuilding the deck over the last two months, now my Yard Machine 600 series tractor will not run properly. The engine will rev and die repeatedly when you try to cut with it. The carb was rebuilt last year and it has new fuel lines and filter. Is this an adjustment problem or is the carb...

Briggs Twin Running Rough [ 1 Answers ]

I have a B&S twin that is running very rough. I've replaced both plugs, removed both heads and cleaned 20 years of carbon out. Late last season, I rebuilt the carb and it ran great. I compression tested both cylinders and got 90 PSI from both. After the compression test, I forgot to hook up...

18 horse Briggs twin 2 [ 3 Answers ]

I have an older model riding mower w/an 18 horse briggs twin II and I Rebuilt the carb and it ran fine for a little while but now it seems like It is starving for gas! It has spark! Can anyone help me Thanks Bill:

View more questions Search