Ask Experts Questions for FREE Help !
Ask
    gretchensugrbrtchs's Avatar
    gretchensugrbrtchs Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 10, 2007, 03:10 PM
    Geothermal thermostat problems
    Hello my problem is with a thermostat that is geothermal, I have a thermostat in every room and this room will not cool. I can only gather that this is my problem. Could someone please help? It is a Mears Elec. Electromode single break model m-7. Thank you.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Sep 20, 2007, 08:07 PM
    It sounds like your problem is with your zone system not the geothermal side. Give us more info if you can.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat problems or furnace problems [ 22 Answers ]

Is it possible that a thermostat operates correct all the time except when it reaches the temperature that is set doesn't maintain that temperature?:D I noticed that actually that thermostat gives a signal to the furnace but furnace doesn't turn on but that happens only when thermostat needs to...

Heating/ thermostat problems [ 2 Answers ]

I don't know much about HVAC because I haven't had many problems till now. My thermostat (honeywell T8001C) display goes blank and the heat will not turn on. I've tried flipping the breakers in the garage. That won't work. Any ideas?

Thermostat problems [ 1 Answers ]

I have an old janitrol t-stat with 7-wire configuration y-g-r-o-w2-e-c I've purchased a hunter digital t-stat with a 5 wire configuration RC-RH-W-G-Y How do I get this thing to work? The old t-stat is as follow y-(yellow) g- (green) r(red) o( orange) w2- (white) E (brown) C- (blue) Help me...

Any problems using digital thermostat [ 1 Answers ]

I bought an older home that has an old Sigler 100,000 BTU, forced-air propane furnace. It has a standing pilot but does have a metal flue to vent it so I'm not sure if it's a natural draft or an 80+, I'd suspect it's natural draft. (We primarily heat with wood, but the furnace has worked well...

View more questions Search