Ask Experts Questions for FREE Help !
Ask
    Ripley33's Avatar
    Ripley33 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 4, 2007, 01:41 PM
    Kodak Easyshare installing error
    Im trying to install the kodak easyshare software in my computer, and every time I put the disk in, it comes up "Kodak easyshare was unable to finish your task. (Error code 32x62x1x) Would you like to go online to look for a solution" I've tried finding a solution and its not working... my D drive is full, I know why that's why its not working, but how can I clean my D drive out so it will work?? Thanks
    nauticalstar420's Avatar
    nauticalstar420 Posts: 3,699, Reputation: 423
    Ultra Member
    		  
    #2

    Sep 4, 2007, 01:46 PM
    I don't know if it would make any difference, but have you tried downloading it from the site instead?

    Here is the web address : http://www.kodak.com/global/en/servi...kn026079.jhtml
    Ripley33's Avatar
    Ripley33 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Sep 4, 2007, 01:50 PM
    Hey thanksss... ill try it for sure..
    nauticalstar420's Avatar
    nauticalstar420 Posts: 3,699, Reputation: 423
    Ultra Member
    		  
    #4

    Sep 4, 2007, 01:50 PM
    You're welcome and good luck! :)
    Ripley33's Avatar
    Ripley33 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Sep 4, 2007, 01:52 PM
    Nope... it still did the same thing :(..
    nauticalstar420's Avatar
    nauticalstar420 Posts: 3,699, Reputation: 423
    Ultra Member
    		  
    #6

    Sep 4, 2007, 01:57 PM
    Hmm, try running a disk cleanup. Go to your start menu, accessories, system tools and then disk cleanup. I don't know if this will help, but its worth a try.

    You can also try downloading something called CCleaner : CCleaner - Home

    It frees up hard disk space. :)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kodak easyshare [ 7 Answers ]

How may I stop Kodak easyshare from starting at start-up. I have gone to 'msconfig' startup tab and removed the 'x' for Kodak easyshare to begin at startup. But when I reboot it comes back. I want to use it when I need it. I do not want it to show in my system tray after startup, routinely. ...

Error Loading Operating System while installing Windows XP [ 4 Answers ]

Hi all, I`ve recently installed a Vista Ultimate and felt that XP was better, so as normal, formatted the harddisk and installed XP. At 1st, after the XP reboot after the first installed, there`s this message ` Error loading operating system`. So I thought I just use `FIXMBR` and re-install XP....

Kodak Camera [ 1 Answers ]

I've been using a kodak easy share camera for over a year and just received a new kodak easy share camera. Do I need to uninstall the software for the old camera before installing the software for the new camera?

UNMOUNTABLE_BOOT_VOLUME error when installing windows xp [ 3 Answers ]

Hi, I am Pradeep. I have a celeron 1.1 with mercury MB. I was running windowsxp for the past 6 months. Recently when I tried to re-install using bootable windowsxp cd the setup stopped saying that the : UNMOUNTABLE_BOOT_VOLUME with error code: STOP: 0X000000ED(0X812FBA5B, 0XC0000010,...

View more questions Search