Ask Experts Questions for FREE Help !
Ask
    getzgoing's Avatar
    getzgoing Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 4, 2007, 10:29 AM
    Hot tub jets
    I recently bought a used Pacific hot tub. It works great, but it seems I do a lot of gathering the jets. They pop out and go to the bottom of the tub. The previous owner used bromine, and I am using chlorine. The stray jets have a residue on them coming off, so I clean them try to put them back in and they still pop out. I can't seem to get them correctly turned/ screwed in. Does anyone know what I can do besides my all time fix everything with SUPER GLUE?? Thanks,
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 4, 2007, 02:15 PM
    It is very likely the jets are made of plastic and the bromine has begun to deteriorate the outer surface. You may need to buy new or ask a dealer if he has any old spas for parts.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No Hot Water to shower head, but Hot water to the Tub? [ 2 Answers ]

My husband and I just purchased a new house. We have found that the shower pressure in the bathroom is wonderful however once you have set the right temp from the tub spout and switch over to the shower no hot water makes it to the shower head. We can only turn off the cold water completely in...

No hot water from tub faucet; all others - very hot [ 2 Answers ]

Every hot water faucet in my house produces scalding hot water. EXCEPT the upstairs tub/shower. From that faucet we only get lukewarm water. Why? What should be replaced? bradsmithmm

Hot tub g.f.I [ 1 Answers ]

I recently hooked up a hot tub that required a 240v with no neutral. (50A) I took a two pole 60 from the main service and ran 6/3 teck cable to a 2cct outdoor enclosure outside to within 5' of the tub. Into the enclosure I hooked up the red to the main the black to the other main and the blue to...

View more questions Search