Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
USB/driver/camera interface not working
[ 8 Answers ]
Hello, I have a Sony Cybershot digital that I am trying to use with an Acer Aspire 5050 laptop. I thought that Windows XP had drivers built in so that when you connected a USB device, it would show up in My Computer like a mass storage device. ANyway, long story short, I cannot get my camera...
Using a Zydas 1211b USB adapter with a USB Extension cord.
[ 12 Answers ]
I just bought a Zydas 1211B USB WiFi adapter,but it came with no cord.It works fine when plugged directly into my laptop,but when I plug it into a 5ft usb extension cord Windows recognizes it,but I can pick up no signals that I normally can.Occasionally Windows acts reluctant to recognize it,any...
USB not working after service pack 2
[ 2 Answers ]
Hi there, I have a little problem with my laptop TCM Cytron MD40200, motherboard ACPI\PNP0C02. I had XP Professional installed and everything worked OK but as soon as I installed service pack to the usb would not recognize any of the devices I would plug into it. I thought I needed to update...
SAMSUNG Q25 USB Ports not working
[ 2 Answers ]
We have a laptop (SAMSUNG Q25 Model) and we were using it for about an year without any problems. And suddenly now there some problem with its USB ports. All the USB ports in the laptop are detected and installed, but when I connect a flash disk or mouse or keyboard, it doesn't detect any of...
USB 2.0 not working in Windows XP
[ 3 Answers ]
Hi, I'm having trouble getting an Intel USB 2.0 hub accepted by windows XP but the hub itself will operate at USB 1 speeds (ie Windows accepts it as a USB port, it just operates at the slower rate and gives me warnings when I fit USB 2 hardware into it (like thumb drives) that the drive will only... View more questions Search
|