Ask Experts Questions for FREE Help !
Ask
    cccmorris's Avatar
    cccmorris Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 31, 2007, 09:54 AM
    Condenser continuous run
    I have a borg warner furnace / AC unit. The unit cycles properly while in heat mode. However. In a/c the unit blows cold but the condenser will not shut off. Any cycle control in the condenser unit it's self?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Aug 31, 2007, 10:03 AM
    Check the contactor as the contacts may be welded shut. Many time you can force them open and clean with a small file or finger nail file to make a short term fix, but would advise replacing. Not expensive or difficuilt to do. Change each wire one at a time on the new. SHUT POWER OFF before doing any repairs.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower Set to "Continuous Run" turns off Briefly when Compressor Cycles [ 4 Answers ]

We have two AC units/zones servicing our house... We have both systems set (at the thermostat) to continuously run the blowers even if the compressor has cycled off. The blower on one unit, however, cycles off briefly for about 2 seconds when the air conditioner compressor turns off, despite...

Continuous data [ 1 Answers ]

If data is grouped together, such as age (between 10 - 20) is it still continuous?

No heat, continuous blower [ 6 Answers ]

I've got a Day and Night furnace that has an electric ignition pilot. Normally, when the heat is turned on, you can hear the *click *click *click of the electric pilot ignition and then the blower comes on afterward. My current problem is that the pilot light now never lights (there's not even...

Altering Oil Burner Transformer wiring for continuous run [ 1 Answers ]

On Monday I had the oil burner service man come in and fix a problem where the oil burner kept shutting down every 10 hours or so for 2 days. He cleaned the nozzle and the system worked fine. This morning Wednesday (2 days later) we received an oil delivery and after an hour or more we had no...

View more questions Search