Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
20 HP Vtwin briggs engine pulley removal?
[ 3 Answers ]
I have a 20 HP Briggs that needs the engine pulley removed. There were two pulleys on the shaft. The lower pulley was removed by simply removing a bolt at the lower end of the shaft. The upper pulley looks to be keyed for the shaft. I can not get this pulley to come loose. I have tried about...
Briggs and stratton
[ 6 Answers ]
My briggs and stratton lawnmower was running great then started spluttering. Cleaned air filter changed spark plug still the same. Spark plug goes a sootie black colour in 30 secs. Also its pulsing badly with a bit of black smoke. Any help welcome ...
16.5 hp briggs and stratton
[ 2 Answers ]
I have an older 16.5 hp Briggs and Statton riding mower,and have had the starter rebuilt. I was told that before I put it back on the mower I need to have "The Valve" turned or it would be pointless.My question is what valve needs to be turned and where is it located.I am assuming I would takr the...
Briggs and Stratton 16.5 hp
[ 3 Answers ]
My friend has a Briggs and Stratton 16.5 hp engine on a riding lawn mower. He asked me if I had ever seen one that leaked oil from under the flywheel. He said there are two holes under the flywheel that oil is seeping out of. I am totally at a loss of the holes he is referring to and therefore I...
10 hp briggs and stratton
[ 1 Answers ]
I need to know what the intake and exhaust valve setting for a briggs and stratton generator. Thank you :( View more questions Search
|