Ask Experts Questions for FREE Help !
Ask
    NCLeatherneck's Avatar
    NCLeatherneck Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 29, 2007, 07:34 AM
    Kenmore Washer Makes Noise
    My Kenmore Washer, same model as Joe's (see below), has exactly the same symptoms. Help please.

    Thanks,
    Bert

    Quote Originally Posted by Joe888
    HI, I have a kenmore washer model number 110.23822100 . My wife was doing a large load of laundry today and all of a sudden it started making a burnt smell and shut off a minute later. An hour later it will turn on and run but it if making a buzzing noise when it agitates. I have not run it long to see if it shuts off. I just ran it through a prewash cycle. It drains and spins normal. Does anybody have an idea what is going on?

Check out some similar questions!

Kenmore washer: Noise after spinning [ 4 Answers ]

HI. I have a Kenmore 70 series washing machine that is about 2 years old. (Model # 26752500) It works just fine (fills, agitates, drains, spins) but when the spin cycle is over and the drum stops spinning, it makes a very loud noise. Do any of you have an idea of what the problem could be? Can...

Kenmore washer making loud noise [ 15 Answers ]

Hi! I have a kenmore washer that is @ 20 months old. After the wash cycle, it sometimes makes a loud banging noise (I guess it is switching gears?) before the rinse cycle begins. This doesn't happen all the time. Could it be that the washer is not level or maybe the load is off balance. Any...

Kenmore 80 series washer noise [ 2 Answers ]

The washer was making a loud knocking noise during spin cycle, that quit now it just makes a loud whining noise. I took it apart and found what I thought was a belt twisted and hanging loose around the gearcase, I have since identified it as a sound dampening ring, clutch housing. I matched the...

GE Washer makes loud noise [ 3 Answers ]

I have an older GE washer (about 5-7 years old) that has started making a loud, dry metallic grinding sound when running. I had to replace the clutch about 4 years ago and recently the clip that holds it in place came loose and I had to snap it back in place. The washer worked fine for a few...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.