Ask Experts Questions for FREE Help !
Ask
    GARY SEVERN's Avatar
    GARY SEVERN Posts: 5, Reputation: 0
    New Member
    		  
    #1

    Aug 27, 2007, 01:51 PM
    Knock-down textured finish to ceilings and walls?
    What is some of the methods to do a 'knock-down' textured finish to a ceiling or walls?
    RickJ's Avatar
    RickJ Posts: 7,762, Reputation: 864
    Uber Member
    		  
    #2

    Aug 27, 2007, 02:19 PM
    First "stomp" the mud on with a big brush, then very lightly drag a wide (12-18") mud blade over it.

    Here's some more on it: Hometime - How-To - Project Help - Drywall

    Instead of the sprayer they suggest, just use a big texture brush that is typically used for textured ceilings that are left not "knocked down".
    GARY SEVERN's Avatar
    GARY SEVERN Posts: 5, Reputation: 0
    New Member
    		  
    #3

    Aug 27, 2007, 02:30 PM
    Thanks, That is probably the way I will do it. I'll be trying a sample of the 'stomp' method as well as a 'roll on' method tomorrow. Wish me luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cracking, popping noise in walls and ceilings [ 15 Answers ]

I've been living for 3 months in my new 3-story townhome, and I've recently Noticed loud cracking noises coming from various locations along my interior and exterior walls and ceilings. The noise only occurs once, although different locations can pop at around the same time. These noises come...

Knock-down ceilings [ 1 Answers ]

What are some of the easiest way to do a knock-down ceiling and walls?

Ceilings different levels [ 1 Answers ]

I just removed a wall that was separating my livingroom and my kitchen and now they are two different levels. My kitchen is about a inch lower than the living room.my kitchen is drywall and my living room is ceiling tile how could I join the two rooms without building a header to go over it

Older home, ceilings and walls covered [ 3 Answers ]

Hello We're looking at an old 3 level (walk up attic) Victorian, early 1900s. Structurally, it appears to be sound, solid foundation, straight lines, etc - however, most of the walls in the house have floor to ceiling wood paneling (nice looking wood, not 70's style!) which appears to have been...

Smoothing textured walls [ 8 Answers ]

Help! We have heavily textured walls which catch all the dust. I would like to smooth out the walls, do I use "sheetrock topping joint compound"? Or something else? Do I put this on in thin layers or in one thick layer? This is hard work for an old lady, any advice would be so gratefully received....

View more questions Search