Ceiling fan

marisolmorales_esq Posts: 1, Reputation: 1

New Member

Aug 25, 2007, 07:28 PM

Ceiling fan

I can't find the reverse button on my ceiling fan

esquire1 Posts: 2,483, Reputation: 209

Ultra Member

Aug 25, 2007, 09:03 PM

Don't know what brand you have but mose models are on the side of the motor shell

ceilingfanrepair Posts: 5,733, Reputation: 109

Uber Member

Aug 29, 2007, 01:22 PM

What make of fan is it and how are the speeds controlled?

Add your answer here.

Check out some similar questions!

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling [ 3 Answers ]

I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...

Ceiling fan remote control coverting to light/fan dimmer [ 2 Answers ]

I am currently remodeling my home and am coming across a major problem that NO ONE seems to have an answer for. I have two ceiling fans that operate via remote control. The rest of the ones in my home are the popular "pull down" chains - and those work prefectly with the new fan/light dimmers...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

Hanging ceiling fan from vaulted ceiling peak [ 2 Answers ]

Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this?