 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Problems with 2003 PT cruiser shifter cables
Does anyone out there know where I can get the proper end hardware for these cables? I ordered them from an aftermarket place and the length is good, it's just that the hardware is not right- we need one with two loops, not a loop and a screw.
Jessie Mutter |
||||
Check out some similar questions!
The a/c on my 2003 honda accord will all of a sudden stop blowing cold air. I already had the filter changed thinking that was the problem. The mechanic is having a hard time figuring out what is wrong with it because everything checks out good but seems to think it could be a sensor or...
Hey everyone. I have a 2003 Honda civic Si 2 door coupe with 132,000 kms on it. My problem is that I cannot get the car to get up to the normal running temperature with my blower on high. If I leave the blower off, or on low setting, and drive the car, it will get to the normal running temperature,...
My '81 xs650 has been chopped, raked and has the swingarm stretched so everything is not exactly original. My problem is that the gear shifter that sticks out of the side of the engine has the spline stripped and the clamp can't get a good grip. I drilled a hole through it and inserted a pin but it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
