Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding a Subpanel to a shed
[ 7 Answers ]
I planning on adding a subpanel to my shed. I think I have done my homework and here is what I was planning. I was going to add double pole (40AMP 240 volt breaker) to my main panel. It is about an 80 foot run between my main panel and the subpanel I am adding. I already have schedule 80 PVC...
Adding GFCI Breaker to Existing Subpanel
[ 4 Answers ]
I want to add a GFCI breaker to an existing sub panel (used to power a hot tub) so I can have a protected outlet on my patio. However, I'm confused as to how to wire in to the existing wiring. The existing sub panel has a double pole 50A breaker with 2 hot wires (red and black) and a neutral...
Basement subpanel.
[ 1 Answers ]
Thanks in advance for all help involved in my endeavors... First off let me start by saying this is an old home built in 1959 and has all fusible circuits.. The home was somewhat upgraded as far as I can tell in the 70`s with an exterior meter panel with breaker space for extra circuits,but by and...
Adding subpanel
[ 6 Answers ]
I have a 200A main panel in my garage and want to install a subpanel in my basement to feed 4 circuits (15 & 20 A). The best route I can find for the feeder wire is through the garage in conduit, then entering the basement through the concrete foundation. I have a couple of questions. 1. If I...
Adding subpanel
[ 1 Answers ]
I'm converting my garage to a woodshop, so I need 220 service for the table saw and band saw, and potentially later the dust collector and compressor. Also I want to run a new circuit for lights, plus two 110 outlet circuits. That's a possible four 220 and three new 110 circuits. I've got a... View more questions Search
|