Ask Experts Questions for FREE Help !
Ask
    bethporter61's Avatar
    bethporter61 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 22, 2007, 06:09 PM
    Ceiling Fan Light
    I pulled my ceiling fan light pull toggle, and it broke, that I can fix, but the light won't come on, I changed the light, but now when I pull the pull toggle, it does not work. I am not much for electrical things, I am not really into getting electricuted. Is there an easy fix for this?
    Thank you so much.
    Beth
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Aug 23, 2007, 02:54 PM
    How did you wire the replacement switch?

    Ceiling fan pull chain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Installing a light kit on a ceiling fan where a switch enables both fan and light [ 2 Answers ]

I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...

Ceiling fan remote control coverting to light/fan dimmer [ 2 Answers ]

I am currently remodeling my home and am coming across a major problem that NO ONE seems to have an answer for. I have two ceiling fans that operate via remote control. The rest of the ones in my home are the popular "pull down" chains - and those work prefectly with the new fan/light dimmers...

Trouble with ceiling fan on a dual fan/light dimmer switch [ 1 Answers ]

I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...

View more questions Search