 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton Bay Ceiling Fan
I have had my fan for about 2 months now. It was working perfectly fine for the first two weeks of use. After the first two weeks, the remote stopped working. I tried replacing the batteries in hopes of it working, but nothing is happening. The red light turns on when I push buttons on the remote, but the fan remains the same. The connections are right, but I do not believe that the fan is able to run at its top speed. If you could suggest anything that would be greatly appreciated! Thanks!
|
||||
|
||||
|
Do the fan and light come on at all? What are the symptoms?
Ceiling fan remote controls - help and FAQ- Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...
New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?
View more questions Search
|
