Ask Experts Questions for FREE Help !
Ask
    blair96mike's Avatar
    blair96mike Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 19, 2007, 12:17 PM
    Dryer Voltage
    I just purchased a used Kenmore dryer built in 2003. It has markings for 120 and 240 volts. Is this unit dual voltage, and will my existing 220 volt plug wire in with no problems as long as I match the red and black wires? I believe the white wire goes to the center post and the ground will "piggy back" to the existing ground to frame.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Aug 19, 2007, 12:59 PM
    Post model #. See and we'll look to if any info is at www3.sears.com.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Voltage Regulater [ 2 Answers ]

I have a 1991 Ford F250 Extended cab 4X4 with a 7.3 diesel every morning when I go to start it the batteries are dead I jump it and it starts. The gauge shows that it is charging and I can start it the rest of the day unless I let it sit for too long then the batteries are dead again. I have brand...

Kenmore Dryer voltage [ 4 Answers ]

Good morning! Excuse me, I don't speak English and I am writing of Brazil with the help of a translating program. A friend gave me a drying one, Kenmore Dryer 80 Series, MOD 110.62852100, to SER. ML3716205, TYPE DWSR-HE-2406028-CV54, and my doubt is on the voltage of this machine, I...

Voltage on neutral [ 3 Answers ]

I just ran a completely new 10 gauge wire for my newly relocated clothes dryer. I wired up the breaker and turned if off, and turned the main breaker back on. When I measure voltage between the black and white OR between the red and white even though the breaker is OFF I get 1.3 volts. How...

Voltage Drop [ 2 Answers ]

I have a 20 amp breaker;there are a total of 7 receptacles on this circuit with a 15 amp GFI on the first receptacle. The first 5 receptacles in line work fine, the last two receptacles which are approximately 70 feet from the 5th receptacle flip the 15 amp GFI off when plugging in a drill. I...

Voltage doubler [ 1 Answers ]

How do you figure out how big of a capacitor you need for a voltage doubler circuit? I am putting together one for a 250 VA 24 volt transformer.

View more questions Search