Ask Experts Questions for FREE Help !
Ask
    MTDproblem's Avatar
    MTDproblem Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 17, 2007, 10:22 AM
    MTD lawn tractor clutch pedal sleeve slips off
    I have been having a problem with my clutch pedal sleeve slipping off and wondered if anyone else has had that problem. My pedal has no retaining ring or fastener how should I fix it?:(
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Aug 17, 2007, 04:51 PM
    Yes, lots of people have that problem, when you can allow it to set for a couple of days, remove the sleeve and place clear silicone inside the hole and slip it back onto the pedal rod. Have some paper towels ready because it will ooze out the opposite end. Let it set for a couple of days and allow it to set well.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

MTD Lawn Tractor [ 8 Answers ]

Greetings, I have a 1991 MTD lawn tractor 18hp w/46" deck, 6 speed, low and high range. Over the past year 1st through 4th won't move tractor forward and I have to use position 5 or 6. Is this a problem with the trans or a drive belt problem? The only belts that have ever been changed are the deck...

Mtd lawn tractor [ 6 Answers ]

I recently bought a used mtd lawn tractor, 38" deck, 7 speed manual ,12 hp I/c briggs engine. The tractor needs a new transmission belt. Because I don't have an owners manual or parts list, I don't know which belt to order. Does anyone know what belt I need?

Clutch Replacement on John Deere 160 Lawn Tractor [ 3 Answers ]

I am trying to remove and replace my clutch on a John Deere 160 Lawn Tractor. When I turn the bolt at the base of the clutch that holds the clutch to the mower, the belt wheel spins so that I am unable to loosen the bolt. Anyone have any ideas on how to stop the wheel from spinning?

Toro lawn tractor clutch repair [ 4 Answers ]

Hi I bought a used Toro lawn tractor model# 5700. The blade clutch on the engine crank broke. Both wires coming out of it broke off inside the housing. Is there a way to open the clutch up and replace the wires or am I stuck buying a new clutch? Thanks Stew

Mtd lawn tractor [ 3 Answers ]

I have an MTD lawn tractor seems to act like it is sliping if forward gear I have repaced the belt. Does not do this in reverse. Could it be the transmission is that rebuildable?

View more questions Search