Ask Experts Questions for FREE Help !
Ask
    Taxgoddess's Avatar
    Taxgoddess Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2007, 08:15 AM
    Kenmore Elite HE3t Washer Model#110-42922-202
    :confused: Washer will not spin out. Is grabbing clothes and ripping holes in them. Drum looks to be out of alignment with seal. Have tried rinse/spin cycle which worked first couple of times but, now starts to fill then makes a buzzing noise as if something is not engaging. Drain/spin cycle will drain but not spin. Have a son who is a bedwetter need immediate assistance ASAP if possible with this problem. I am mechanically inclined thanks to my father....so I can read schematics and understand DIY repair instructions. Thank You in advance for your suggestions/remedies.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Aug 12, 2007, 08:44 AM
    Check and make sure the 2 tub ring clips are not broke. They are located at about 5 o'clock and 7 o'clock. Then ceck the tub snubber located at about 1 o'clock. These keep the tub in align. You may also want to look at the coupler located between the motor an transmission. It may be damaged or broke. Good Luck
    Honest Abe's Avatar
    Honest Abe Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Aug 21, 2007, 09:28 PM
    Kenmore Elite he3t will not spin or wash all the lights are on what could likely be the problems and what troubleshooting should I do on it.
    doutbl's Avatar
    doutbl Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Sep 27, 2010, 01:36 PM
    Kenmore Elite he3t will not spin or wash all the lights are on what could likely be the problems and what troubleshooting should I do on it. F21 ERROR CODE.
    doutbl's Avatar
    doutbl Posts: 2, Reputation: 1
    New Member
    		  
    #5

    Sep 27, 2010, 01:39 PM
    Kenmore Elite he3t will not spin or wash all the lights are on what could likely be the problems and what troubleshooting should I do on it. F21 error code. What dose this mean.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Washer (Model#110.82873120) Spin Probs [ 5 Answers ]

I have the Kenmore Elite King Size Washer, Model#110.82873120. Last night it quit working on the "Spin" cycle. I can still hear and feel the cycle operating, but there is a "clicking" that goes on and the agitator doesn't spin, nor does it agitate during the cycle. The draining mechanism...

Kenmore Elite Dryer Model 110.63932102 will not heat [ 6 Answers ]

My dryer stopped heating although it runs. I confirmed I was getting 240volts at the source. I checked the continuity of the element, the thermal fuse and the thermostat and found that they were continuous. I have read that the thermistor might have something to do with it...

Kenmore Elite Dryer Model 110.74972301 no heat [ 1 Answers ]

I have a dryer that runs but has no heat. The ignitor do not spark the gas to get the heat on. The model is 110.74972301. I had this on an older model and found a fuse on the back of the dryer that was an overload fuse. Replaced it and it worked. I can not find that on this dryer. Can you...

Washer Kenmore Elite Model 110.23022101 [ 2 Answers ]

Hello, My Kenmore Elite washer made a loud clicking noise when it got to the spin cycle. It appears that it will not spin or agitate. It will drain. Any thoughts before I call a repair man?

Kenmore Elite Model 110 [ 1 Answers ]

The washing machine is not spinning, so I am attempting to replace the coupler. I am able to partially remove the front console, but I can not remove the main knob. I found instructions that say to hold the dial and turn timer knob counter clockwise, but this is not working. This should be...

View more questions Search