Ask Experts Questions for FREE Help !
Ask
    bmsouth's Avatar
    bmsouth Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 7, 2007, 04:33 PM
    Sears Washer Model No. 110.29812891
    How do you remove the back panel?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Aug 8, 2007, 05:56 PM
    Should me 2 screw to remove the plate to access the drive train. About anything else you will have to remove the entire cabinet. You can take a putty knife and push in on the 2 spring catches on either side to raise the lid. Then you will have to remove the console. Then rock the cabinet away from the rear pane and lift off the locating tabs.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washer model 110.23032101 [ 6 Answers ]

I have a Kenmore Washer model 110.23032101 that does not spin out completely. It seems to spin but sometimes the clothes are still wet when the load finishes. We have replaced the motor and this has not solved our problem. Any suggestions would be appreciated.

Kenmore Elite Washer (Model#110.82873120) Spin Probs [ 5 Answers ]

I have the Kenmore Elite King Size Washer, Model#110.82873120. Last night it quit working on the "Spin" cycle. I can still hear and feel the cycle operating, but there is a "clicking" that goes on and the agitator doesn't spin, nor does it agitate during the cycle. The draining mechanism...

Washer Kenmore Elite Model 110.23022101 [ 2 Answers ]

Hello, My Kenmore Elite washer made a loud clicking noise when it got to the spin cycle. It appears that it will not spin or agitate. It will drain. Any thoughts before I call a repair man?

View more questions Search