Ask Experts Questions for FREE Help !
Ask
    HugoHark's Avatar
    HugoHark Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 7, 2007, 10:58 AM
    GFCI for Permanent Above Ground Pool
    I am looking to add an outdoor receptacle for my soon to be installed above ground pool. Obviously I want it to be a grounded outlet (GFCI)... Do I need to install an GFCI breaker ? Or can I add a GFCI outlet off an existing GFCI outlet and run it out to the pool area. I have already gone through the process of running outdoor wire through the proper external PVC connections, buried wire, bubble, insulted box. Just looking for the proper tie-in at this point. My circuit breaker main box is full at this point, but I have GFCI receptacles running into my unfinished basement close to the area I can connect to the external connection.

    Hopefully - I've explained my situation. Thanks for your anticipated help!

    :)
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
     
    #2

    Aug 7, 2007, 01:54 PM
    You do not need a GFI breaker, as long as you use a GFI outlet out at the pool.

    However, you may have a code issue here: I believe the code requires that all outdoor branch circuits be on their own breaker, not tied in to an existing branch in the house.
    HugoHark's Avatar
    HugoHark Posts: 2, Reputation: 1
    New Member
     
    #3

    Aug 7, 2007, 01:59 PM
    Thanks !

    Can I tie the unused GFI outlets in the basement to another (existing low load breaker) and then make a solo breaker available to the pool (outdoor branch circuit) ? And should that then be a GFI breaker and/or just a GFI outlet into a regular breaker ?
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
     
    #4

    Aug 7, 2007, 02:20 PM
    Quote Originally Posted by HugoHark
    Can I tie the unused GFI outlets in the basement to another (existing low load breaker) and then make a solo breaker available to the pool (outdoor branch circuit) ?
    Yes, but only as long as you can tie the basement outlet to another circuit in the basement. Don't try to connect it into a circuit that goes, say, to a bedroom or the kitchen.

    Quote Originally Posted by HugoHark
    and should that then be a GFI breaker and/or just a GFI outlet into a regular breaker ?
    For the pool, you can do either:
    1. GFI outlet at the pool, run to a standard breaker, or
    2. Standard outlet at the pool, tied to a GFI breaker

    I like the first choice here best, as it is immediately obvious to anyone using the outlet at the pool that it's properly protected. Plus you can easily test it. And when it pops it's easy to reset.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Under above ground pool goes. [ 3 Answers ]

Last year I put up a 15' above-ground pool. I do not have any great level spot in the yard but found an area that worked okay. Unfortunately, it's at the bottom of a slope... so it stays wet easily. This year, I'm wondering what to put under it besides the tarp-thing that came with it. If I made a...

Above ground pool [ 5 Answers ]

I was wondering, can I keep an above ground pool up all winter with no water in it or will it collapse even though it has the braces all around it? Thank you.

Install New Pool Liner-Above Ground Pool [ 1 Answers ]

We are going to install a new liner in an above ground pool this weekend. I have read conflicting information as to when the skimmer and jet holes should be cut. Do you fill the pool with water within a foot of the skimmer, attach the trim kit and then cut out the liner? I don't know what to do,...

In ground pool [ 1 Answers ]

I have opened(removed cover) my inground pool for the summer and discovered that there are 4 creases in the bottom. Can you assist in an explanation on why this would happen. They are about 3-4 ft long and 1/8" wide in different areas.

Above ground pool [ 1 Answers ]

My above ground pool was dark green, after shocking it it turned into a hazy blue. I started to vacuum and the water coming back into the pool was dirty. Where should I have the pump on as I am vacuuming? I have a doughboy filter and pump.


View more questions Search