 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat instalation
Good evening everyone. Im trying to convert from an old model york thermostat to a new ritetemp thermostat. It has already been disconected and the wires are not labeled. I have 6 color wire: green,blue,red,white,pink and yellow. Which color wire goes with what letter? A G Y W RH B O RC W2 C. You'll be saving the day. It's Florida in mid summer and it's 100 degrees inside the house. Thank you.
|
||||
|
||||
|
The obvious ones are red to "RH" with jumper to "RC", green to "G" , yellow to "Y", white to "W2". Now you will need to go to the furnace or air handler and see where the blue and pink wires connect to , there should be a terminal board in the air handler that is marked with letters , you will need to look at which wires go to "O" and "C"
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi I just Bought a used Esther Williams pool with no instalation manual. I have no idea how to install this. It's 15x24 oval about 5 years old, my biggest problem is trying to figure out how the straight sections go. Is there anyone that has a manual for one that they can email to me or just advise...
We have recently had our foundation repaired with a jacking system. The toilet was never reconnected after a plumbing test and we have now purchased a new toilet for that bathroom. It appears that the drain under the toilet may be lower than it is suppose to be for the toilet to be installed. My...
My Canon printer was not printing proper color so I went to the help page which advised me to click on the maintenance tab. Looking under "programs>Canon i950 I couldn't find any page with printer controls. I uninstalled the program thinking that by reinstalling it the page with those functions...
I have a new Hampton Bay Ceiling fan. It has a remote control that I need to install. There are the "main" power wires on one side. black white and blue. I know what to do with these. On the other side of the remote are two more wires. Red and white. I am not sure where to connect these. There are...
Hi pals If we have to install a file in all the systems in a lan then do we have any shortcuts so that if we install in one system it can be used in all other systems , like can we install a file in a netwok?
View more questions Search
|
