Ask Experts Questions for FREE Help !
Ask
    devonspence's Avatar
    devonspence Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2007, 11:51 AM
    Sayco shoiwer mixer
    How do I remove the center stem of a sayco shower mixer
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #2

    Aug 6, 2007, 09:45 PM
    Sayco is an easy repair. Get a new stem and fine a 1/2" drive deep well socket that fits it and you can remove it without taking the trim plate off. The regular tub wrenches sometimes do not fit well enough to work.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sayco diverter stem [ 6 Answers ]

I'm working on old apartment building.. trying to replace old sayco diverter stem.the newer one I bought at a plumbing house look like a perfect match but when I install part of the water still flows out tub spout when it is diverted to shower.. not many moving parts... hard to see where problem...

Sayco shower mixer [ 1 Answers ]

How do I remove the center stem of asyco shower mixer

How to get dj mixer [ 1 Answers ]

Does anyone know how to get a free dj/mixer software? If so where?

SAYCO Stem Valves [ 2 Answers ]

As a Jack-of-all-trades for an apartment complex, I sometimes have to worn stem valves for bathtubs faucets. The valves are made by SAYCO. The valves controlling the hot water seems to fail most. Whenever I need a hot water stem, every hardware store on the planet is sold out. However, they all...

Exchange of an old sayco diverter stem [ 5 Answers ]

My faucet on my bath top was leaking.It is a three handle system. I took the stems out and replaced the O-rings. Nothing is leaking anymore, but when the diverter is insalled, part of the water still flows out the tub spout when it is diverted to shower. The diverter parts are fine. Is there a...

View more questions Search