Ask Experts Questions for FREE Help !
Ask
    khastings's Avatar
    khastings Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2007, 09:25 AM
    Replacement Rubber for Shower Surround
    How do you replace and where do you find replacement rubber for shower surrounds?

    I don't mean for the door, but the rest of the shower. My rubber is loose and I don't know how to replace it or where to find the rubber to hold the glass in.

    Please advise.

    Thanks,
    glavine's Avatar
    glavine Posts: 895, Reputation: 87
    Senior Member
    		  
    #2

    Aug 5, 2007, 06:19 PM
    There Are Shower Door Companys Or Glass Companys Im Sure Where You Live, Id Try Them
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Aug 5, 2007, 06:24 PM
    Why Not Thouroughly Clean The Surface And Buy Some Silicone With A Matching Color And Silicone The Cracks And Seams.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Aug 5, 2007, 08:37 PM
    Not so sure the silicone is what she needs. These are soft rubber sweeps that seal. They are replacable but no normally a hardware store item. Glavines suggestion is a good start.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Finishing drywall against a shower surround [ 15 Answers ]

What is the best method for finishing the drywall edges when placing them over the panels of a 3-piece, pre-fab shower surround unit. I know caulk is an option but it's 5/8" greenboard and it would seem that you would need a pretty perfect cut to make this look good seeing as it's the most visible...

Shower or tub surround replacement [ 5 Answers ]

Considering replacing my Bathtub/shower surround. Can anyone tell me if the drywall is going to have to go as well because of the glue which was used in order to install the thing in the first place? I'm thinking it's going to tear drywall paper on the way out? Any kind of solvent avail? Thanks

Rubber liner shower base [ 1 Answers ]

I was woundering if anyone knew how to seal a rubber liner to the drainer strainer of a tile shower. Is there a special glue or silicone you must use to adhese the to together before you tighten the bolts down.

Tub/Shower surround [ 1 Answers ]

I'm currently thinking about removing the tile on the tub/shower surround and donot want to use those thin tub/shower kits. What I want to do is remove all the tile and cut the drywall out so I could use one of those tub/shower surrond walls with the flanges that attach to the studs. I have found a...

Shower surround holes [ 1 Answers ]

Hi I need to be able to drill a 5 inch hole in a fiberglass shower surround. The fiberglass is approximatly 5/16 inch thick. What should I use to do that without cracking or tearing the fiberglass??

View more questions Search