Ask Experts Questions for FREE Help !
Ask
    klmann123's Avatar
    klmann123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 2, 2007, 01:16 PM
    Fan light
    I have a harbor breeze fan with a light the llamp cover looks like a dome and I can't get it off to change the bulb
    J Costa's Avatar
    J Costa Posts: 88, Reputation: 9
    Junior Member
    		  
    #2

    Aug 7, 2007, 04:05 PM
    Quote Originally Posted by klmann123
    I have a harbor breeze fan with a light the llamp cover looks like a dome and I can't get it off to change the bulb
    There should be three small screws at the top of the globe or one nut that blends into the globe at the very bottom.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Aug 8, 2007, 05:36 PM
    If It Doesn't Have The Three Screws , And I Don't Think It Does, Try And Twist The Globe, Some Twist Lock In To Place.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing a light kit on a ceiling fan where a switch enables both fan and light [ 2 Answers ]

I have a Hampton Bay ceiling fan with three wires emerging from the top: white, black, red, and green. Presently the white, black, and green are hooked up to a switch and the fan works fine. The red is capped. The fan also has a chain which I intend on keeping on the medium setting indefinitely. ...

Hmpton Fan/Light - Light turning off like its on timer [ 2 Answers ]

Covington 54 with Thermo and remote Love the fan but light turns off in 3 minutes like it is timer/delay mode (which it is not). I put in delay mode and it shuts off in 3 minutes also. Can this be an install issue? When the light shuts off, the remote shows the light still on. Then when the...

Replacing light/fan with light/fan/heater [ 1 Answers ]

Is is possible? Right now we just have a light and a fan. I was wonder if I could put a heater in there as well.

Changed from fan to light fixture and now light will not shut off [ 1 Answers ]

Today I tried to replace a ceiling fan to a light fixture. I connected the black to black white to white and copper to ground. I have a red wire that I don't know what goes to. The light now will not turn off. Should the red wire be connected to something?

Bathroom fan/light: light works, fan doesn't [ 3 Answers ]

I'm back with more "finishing basement" questions. This weekend, I wired my bathroom. This is 20 amp service with 12 ga wire. For the bath fan/light, the power source came into the switch box (1 box, 2 switches) on a 12/2 wire. From there, power goes up to the light/fan on a 12/3 wire. Red goes...

View more questions Search