Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Whirpool washer won't fill
[ 3 Answers ]
My 13 yr. old Whirpool washer LA9500XTW1 stopped mid-cycle with the tub full of water. After trying several times to restart by pushing/pulling knob, it started and completed the cycle including rinse and spin, without any problem. But now I can't get it to start a new load on any part of any...
Whirpool Senseon Dryer not drying
[ 1 Answers ]
Hi Everyone, I have an electric Whirlpool Senseon dryer that's 6 years old. In the past 6 months the dryer has been taking much longer to dry. I have an appliance warranty through our local utility. I've made a call and they have dispatched one of their contract appliance repair contractors...
Whirpool bathtub jets
[ 1 Answers ]
I have installed a whirlpool tub. All the 6 side jets worked fine and it is completely level. Now (since it is all in and attached) two of the side jets on the same side are not working. (The tub only has six jets total-three on each side.) One has poor water flow and the other sucks in air. I...
Install Whirpool Tub
[ 8 Answers ]
I am going to install a whirpool tub in my basement bathroom. I have 1/2 inch copper running to the tub location. My question is: Is it OK to use flexible connections from the 1/2 inch copper to the hot and cold tub faucet? The people at the "local home store" tell me I will lose too much... View more questions Search
|