Ask Experts Questions for FREE Help !
Ask
    sacramento's Avatar
    sacramento Posts: 163, Reputation: 1
    Junior Member
     
    #1

    Jul 29, 2007, 07:39 AM
    Yard Machine won't start after transporting it!
    :confused: My Yard Machine 12.5 HP tractor always started without a problem. In fact, it has a new battery and a new starter. I put it on my truck and moved it to a new location and now it won't start or turn over! Any suggestions. Also, the owner's manual says I should check the fuse. Trouble is I can't find the darned thing. Any ideas on where it might be located would be appreciated. Thanks for your help!
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Jul 29, 2007, 05:16 PM
    Look under the steering wheel housing towards the rear of the unit. This is where you will find the fuse.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #3

    Jul 30, 2007, 01:13 PM
    Well Was The Fuse The Problem??
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Jul 30, 2007, 04:36 PM
    If it was not the fuse I'd start checking the safety switches. Make sure something did not move while being transproted like the blade engagement handle. All of these things can cause a dead tractor.
    sacramento's Avatar
    sacramento Posts: 163, Reputation: 1
    Junior Member
     
    #5

    Jul 30, 2007, 04:49 PM
    Quote Originally Posted by MOWERMAN2468
    Well Was The Fuse The Problem???
    Unfortunately, no! In the meantime, the grass gets higher and higher. Thanks for caring!
    sacramento's Avatar
    sacramento Posts: 163, Reputation: 1
    Junior Member
     
    #6

    Jul 30, 2007, 04:51 PM
    Quote Originally Posted by ballengerb1
    If it was not the fuse I'd start checking the safety switches. Make sure something did not move while being transproted like the blade engagement handle. All of these things can cause a dead tractor.
    I forgot to mention before that one of the cutting blades is swinging free since we moved the darned thing and the other blade seems fine. I will try your suggestion about checking the engagement handle. Thanks!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Yard Machine 12.5 B&S will not start [ 2 Answers ]

Hi everyone. First, sorry for my English. I need some help for my Yard Machine 1 year old with 12.5 hp B&S engine cut mower that has been parked in my garage for over 6 months. Last season It ran very well, but this season It wouldn't start after refilling the new gas that I just bought from...

Yard Machine 12.5 B&S will not start [ 3 Answers ]

Hi everyone. First, sorry for my English. I need some help for my Yard Machine 1 year old with 12.5 hp B&S engine cut mower that has been parked in my garage for over 6 months. Last season It ran very well, but this season It wouldn't start after refilling the new gas that I just bought from...

Yard Machine Clicks but won't start [ 2 Answers ]

Hello All, I just bought my first ever lawm mower this month - a used, very good condition Yard Machine with 17.5 Hp, 42" cut Briggs and Straton engine, did the oil change and cleaned the air filter, put in new gas, and used it a couple of times (I bought my first home with a half acre yard with...

Yard MAchine/MTD Rider Won't Start [ 9 Answers ]

OK. Normally, I would continue to tinker if it was one of my cars, but I have temporarily been outmatched. (HA) I have a YardMachine mower that has finally decided to stop and not start or run. It started three days ago and ran for 5 minutes. This was the first start of the year. It seemed to take...

Yard Machine chipper won't start [ 1 Answers ]

We have owned a Yard Machine Chipper/shredder by MTD, 5.5hp for several years. It has always been difficult to start. We have done the expected maintenance, but doesn't seem to help. Anyone out there with a real clue? Bad owners or bad machine??


View more questions Search