Ask Experts Questions for FREE Help !
Ask
    ARF1988's Avatar
    ARF1988 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 28, 2007, 12:00 PM
    Stall shower diverter/on off know
    How do I replace the knob that turns the stall shower on and off? I purchased a replacement but when I installed it, it would not turn at all. Perhaps I am missing a piece? What pieces should there be?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jul 28, 2007, 01:12 PM
    Please give us the brand name and age of your valve. Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Adding a second shower head to shower stall [ 4 Answers ]

I'm trying to add a second shower head to a shower stall in the basement. What do I need to do to make sure an equal supply of water at the same temperature runs to both heads. I tried to just run a line from the first shower head to the next but that doesn't work.

Narrow Shower Pan/Shower Stall [ 1 Answers ]

Where I can purchase a shower pan/stall approximately 30" wide by 60"? There isn't sufficient clearance adjacent to the toilet to us a 34" width which is available everywhere?

Shower stall [ 1 Answers ]

Can we raise a shower stall to put plumbing underneath it

Shower stall need height of controls and shower head [ 1 Answers ]

Hi Am building a shower and require the height of the taps and the shower head

Turning walking shower stall into bathtub/shower combo. [ 4 Answers ]

Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line...

View more questions Search