Ask Experts Questions for FREE Help !
Ask
    SMORGAN's Avatar
    SMORGAN Posts: 4, Reputation: 1
    New Member
     
    #1

    Jul 23, 2007, 07:57 AM
    Heat Pump Blower Motor Stops
    I have an older Rheem heat pump. The blower motor on the outside unit stopped running. It seemed to only run at about half speed for a couple of minutes then get hot and stop. I replaced the motor and both capacitors. This motor runs at full speed but gets hot and stops after a couple of minutes. The compressor sounds like it is still running. Any ideas?
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
     
    #2

    Jul 23, 2007, 10:09 AM
    Since you have changed your capacitors and the motor still fails it sounds like you have a bad motor. On all motors there are bearings, some are oilable and some are not, if it can be oiled you can try that, the old lubricant turns to a varnish like substance after many years and causes a drag on the bearings causing it to overheat and stop running.
    I would not recommend you operating the A/C until you remedy this problem as it can cause the compressor to fail from overheating.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Condenser Fan Motor Wiring for Goodman AC Heat Pump 3 Ton [ 5 Answers ]

Condenser Fan Motor Wiring for Goodman 3 Ton -------------------------------------------------------------------------------- Hello Everyone, I have a GOODMAN A/C Heat Pump Model# CPLE 36-1 installed 3 years ago. Last week I turned the unit on, the compressor hums (not run)about 3-5...

Day & Night by Carrier fan blower motor stuck on and heat doesn't work [ 22 Answers ]

:confused: Day & Night by Carrier central heating and a/c unit a/c unit model # 518CXX057000MACA date of mgf=1791 heating unit model# 394JAZ060080AAFA date of mgf=4592 Efficiency= natural draft? Type= forced air

Squeaks when blower motor stops [ 1 Answers ]

Were are the oil ports on the blower motor my furance ia a Hiel any one know were to oil the pots? Gibby1000

Blower on top of heat pump not working [ 1 Answers ]

I have a Coleman heat pump that is less than 2 years old and has worked well up until a couple of days ago. Now, the air conditioning and the heat will not work, but the fan and furnace still works. After checking things out myself for small problems with the electrical box, etc, I noticed that...


View more questions Search