Ask Experts Questions for FREE Help !
Ask
    dancehlh's Avatar
    dancehlh Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jul 21, 2007, 09:56 AM
    Back Handspring!


    okay, so I am very close to getting my back handspring but when I do it by myself I always bend my arms so I fall. Is there any advice that I could get to help me stop this???
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
    		  
    #2

    Jul 21, 2007, 12:45 PM
    Have someone with you to when you backspring to assist with your back and give some added strength when you are practicing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low cold water pressure in 2 showers... Not back to back config however [ 8 Answers ]

My home is 16 years old, I've had it for 5 years. I am on a pump - with 70LBS high cutoff and 55lbs Low turn on. All copper - I have 2 Delta 1600 shower faucets - one tub spicket with shower diverter - one shower only. The tub/shower combo has allways had only a trickle of cold water and...

Back handspring [ 4 Answers ]

How do I get no fear with a back handspring?:(

2 periods back to back with large blood clots! [ 6 Answers ]

I have just stared yet another period after just ending one 5 days ago. I had major pain with the last one, I have never had that kind of pain before. Now with this period I just found an extremely large blood clot. Although it looked more like tissue then an actual bllod clot. What could this be...

Plumbing back to back shower valves [ 5 Answers ]

I am plumbing 2 showers that share a wall (back to back). In order to get the hot and cold supplies to the proper side of each valve requires lots of twists and turns. I was advised by someone to just use ½” male threaded connectors on the supply lines (sweat fit to copper) and then simply use...

Interlocking plate back to back feed [ 2 Answers ]

If I use a interlocking plate to backfeed my main(homelite 200amp)from my generator... from my garage... can I use the braker that is feeding the garage if I put it in the proper place to accommodate the interlocking plate? It's a 220 30 amp braker... so part of the question is... will the...

View more questions Search