Ask Experts Questions for FREE Help !
Ask
    Linsing's Avatar
    Linsing Posts: 11, Reputation: 2
    New Member
    		  
    #1

    Jul 20, 2007, 12:12 PM
    Gas Dryer not heating up
    Only one setting is not heating up -- the "high" setting. The other settings seem to be working fine. Any suggestions?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jul 20, 2007, 12:25 PM
    I would say your temp selector switch is bad. I would first check the hi themostat for continuity. If it has then I would test the selector switch for voltage in the high setting. If none replace the switch. Also always be sure the vent is clear from dryer to where it terminates at outside of house. This should be part of routine maintenance
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Gas Dryer not heating [ 2 Answers ]

My 6-year-old Kenmore Elite gas dryer isn't heating. I hear the gas come on, and light, but it doesn't sound like it used to -- it seems to die off quickly, not stay strong. It sounds weak, or something. We had the dryer serviced about 2 years ago because of a faulty control panel, but the control...

Gas Dryer Not heating [ 1 Answers ]

We have an old whirlpool gas dryer that quit heating - the tumbler still works. The fuse is good, we replaced the Igniter and have continuity everytwhere. Only one of the cables coming from the coils leading to the igniter shows a low voltage - 26 (the the incoming cable reads 126) - Any ideas on...

View more questions Search