 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Murray clutch
OK here goes maybe someone can help me I am building a racing lawnmower and I can'r seem to get the clutch to work right if I push the pedal down and put it in gear it takes oof before releasing the pedal can someone help on this I have the clutch pulley and the idler pulley pretty much bwisde each other do I need to like spread them apart more it has plenty on tension once the pedal is relased and when pushed it is loose I really could use the help on this if possible is there a site on here that shows how to set one up that has pics showing details
|
||||
Check out some similar questions!
I am hearing what seems to be my throw out bearing and the transmission is hard to put in gear. Could it be the throw out bearing or the slave cylinder? Or the throw out bearing holder?
The ignition switch on my 2000 Ford Focus would not turn. I had to have it replaced. One year later it is periodically having the same problem, but I keep a very small hammer in the car, and all it takes is a couple of taps on the key for me to be able to turn the key. BUT... now it seems that...
When I am driving on smooth straight road at say 100 km/hr and I realize I want to stop at say 1 km ahead (assume that there is no other vehicle ahead or behind). I can continue at same speed or little less speed, and later apply break when I want to stop. But that means I waste some fuel. To...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
