Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Are Whirlpool dishwashers poorly designed?
[ 9 Answers ]
Here is my story and any help of suggestions to solve a nagging dishwasher problem we have would be appreciated. We purchased a Whirlpool dishwasher about a year ago. The thing was working fine till it started leaking after about six months. That dishwasher was under recall for electrical fire...
Return Air vent sucking air... and being really loud about it
[ 5 Answers ]
In the middle of our living room is a return-air vent. It goes straight up to 2 of the bedrooms upstairs also. When the furnace kicks on, the noise coming from the vent down here is rediculously loud, almost to a point where nothing else is distinguishable above the wind sound. The furnace's...
Cold air return vent
[ 1 Answers ]
I bought a home recently that has gas heat. It has a crawl space not a basement. The cold air return register put our cold air. I always thought the cold air return register takes the room cold air and returns it to the heater. Am I correct and if so have do I correct it.
Boiler air vent
[ 1 Answers ]
I'm installing another zone to my force hot water (baseboard) boiler. The initial installation has a shutoff valve and plug on supply and return so extra zones can be installed. On other multizone houses, I've noticed that each extra zone has an automatic air bleed valve on the high point of the...
Basement return air vent
[ 2 Answers ]
Carrier, modal 58MAC120-20, direct air forced air furnace, seven years old in a 2,700 square foot home seven years old. The basement is 1,200 square feet, open and half finished, has two supply air regesters and no return air vent. What size "opening" is recommended for this area? View more questions Search
|