Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Some fixtures on a switch work some don't
[ 1 Answers ]
I have a switch that doesn't want to shut off, and now that it does, only some of the lights are coming back on. The recessed cans on the switch work but another ceiling fixture doesn't. I took the cover off the switch and noticed the ground wire wasn't connected to the switch and the red wire...
Sockets and fixtures
[ 1 Answers ]
Hello how many sockets and light fixtures can you run off one breaker I want to install a plug socket and light fixture in a basement room I just finished can I just tap into the light fixture in the other room?
Installing new bathtub and fixtures...
[ 7 Answers ]
Hi My wife and I just began ripping out our old bathtub to put in a new one. We decided we would also like new faucettes etc. I disconnected the hot and cold taps but the shower pipe will not come loose. Is this a soldered pipe? It appears to have a nut on it but I can't get it loose at all. Any...
Replacing bathtub and shower fixtures
[ 4 Answers ]
(1) When replacing bathtub "snout", shower controls etc.. Do you caulk around the fixtures or use plumbers puddy? The original installation had plumbers puddy. (2) Do you place the caulk so the fixtures "sqeeze" out some material or just inside the fixtures? Example: I've obtain some...
Fixtures burning out bulbs
[ 2 Answers ]
Not sure if this is a fixture problem, or some other. It seems that I go through lightbulbs rather quickly in two different fixtures in my house. I've even tried those long life, power-saver bulbs, to no avail. Both fixtures are cheap. One is a basic lightbulb fixture that you plug into a... View more questions Search
|