Ask Experts Questions for FREE Help !
Ask
    dfwswf's Avatar
    dfwswf Posts: 11, Reputation: 0
    New Member
     
    #1

    Jul 14, 2007, 07:10 AM
    How to run 220 when all I have is 110?
    Central A/C unit went out so I purchased a large window unit to cool a combined open living - dining - kitchen floor plan only to discover that the plug is 220. And of course I have no 220 outlet where I need to put the window unit. I'm assuming that the outlet will need to be replaced in order to accommodate but what about the circuit breaker? Will it need to be replaced as well? And is there anyway to utilize any of the existing electrical work already in place for the central A/C unit which is not being used at all? I hope what I've said makes sense and that I have used the correct terms. I'm a girl and know very little about electricity and wiring - but I'm willing to learn!! ;)
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jul 14, 2007, 09:54 AM
    Df, we must first confirm that your home has 220 vac coming in. You probably do since you had central air. Do you have any other 220 appliances or fixtures like a water heater, electric dryer, etc.. If you have no 220 I'd say take that unit back and get a 110 . Adding 220 to a home that doesn't have it can run you $1000 easily. If your home has 220 just not where you want it call a licensed electrian from the phone book. More in the range of $250.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Jul 14, 2007, 08:23 PM
    If panel cover was removed, and you see conduits, may push or pull 2 more # 12's, 2 pole breaker, If 30 Amps, need #10. Have competent person work on it. Electricity is dangerous.

    If you had Central Air, you can use that, Will need smaller breaker for your use.
    What is wrong with your Central Air?
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
     
    #4

    Jul 14, 2007, 08:51 PM
    I am sure you have what is more like 240. If you have an outlet with nothing else on the circuit, it could be upgraded to 240, but not a good starter DIY project. Might be easiest to find a 120 volt unit as suggested. Even then, you would need a 20 amp circuit with little else on it for a large unit. Paying somebody to run a new circuit might be a good start on repairing the central air. Has anybody given you a price?

    Depending what the problem is, we might even be able to walk you through a simple repair.
    dfwswf's Avatar
    dfwswf Posts: 11, Reputation: 0
    New Member
     
    #5

    Jul 22, 2007, 12:49 AM
    Well I've decided that since I'll eventually have to repair the central air there's no sense in my investing any more $$$ in an extra window unit when that $$$ could be spent towards repairing the actual problem. Thank you for your help and comments - maybe I'll see you on the pets page! ;)
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #6

    Jul 22, 2007, 06:54 AM
    From what I read on your Central Air. It may be as simple as the Contactor.
    If you don't understand. Please not another red mark. If there is 24 volts to contactor, and it doesn't pull down. It is open, and needs to be replaced, a $20 part.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

220 to 110 [ 7 Answers ]

I'm wanting to run a 110 outlet off my 220 serface unit how do I go about doing this?:confused:

110 to 220 [ 5 Answers ]

We need an outlet that needs to support 220v 27.4 amps. Ihave 2 120 lines at that location both with 20 amp breakers. Could I just use those lines connet them to the new outlet 2 hots and 1 ground. Then get a double poled breaker in place of the other 2 breakers. If so on the new dbl breaker...

110 vs. 220 wiring... [ 7 Answers ]

I bought a table saw at an estate sale. I got a good deal on it! I noticed after I got the saw home (I looked at it before I bought it, but didn't look close enough) and realized the plug appears to be a 220 plug. This won't work for me as I'm limited to 110; I'm a renter. The plug has 3...

Is it 110 or 220? [ 2 Answers ]

Hi, I had 2 outlets installed where there were once a heater and its thermostat. The light on my voltage tester is on for both, but when I plug a clock radio (110) into either new outlet, nothing happens. Is it possible that these new outlets are wired at 220 to accommodate the heater that was...

Getting 110 from 220 [ 3 Answers ]

I have a 3-wire 220V going to my well house. I am wanting to come off the 220 to a 110 outlet. I realize this is not the safest thing to do but it is only temporary. My question is, I know I use one wire so I cut let's say the white wire and connect it to one side of this GFI outlet, Do I connect...


View more questions Search