Ask Experts Questions for FREE Help !
Ask
    esad's Avatar
    esad Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 14, 2007, 05:54 AM
    Troubleshooting for St. Regis fans
    I bought 2 St, Regis fans for my family room. I would like to connect these two fans to switches. One switch to control the blades, the other switch to control the lights. Is this possible? If so, how is it done?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jul 14, 2007, 12:51 PM
    No it's not, these fans come with a preinstalled remote that has to be used to control the fans. You can set them both to the same frequency so they both operate from the same remote.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay St. Regis Ceiling Fan [ 2 Answers ]

I bought a Hampton Bay St. Regis Ceiling Fan at the Home Depot yesterday but there were no instructions enclosed. The fan was reduced and it looked like it may have been returned by someone. Where can I get online assembly instructions for this 60 inch fan? Thank you.

Troubleshooting Hampton Bay remote fans [ 6 Answers ]

Hi. I have a HB remote fan. I have replaced the receiver twice already because upon installing the receiver and turning on the light/fan w the remote there has been a loud POP and the receiver smells burnt and is toast. I have appropriate voltage coming in-so can anyone help?

Network troubleshooting [ 2 Answers ]

I have a desktop PC (A)connected by ethernet cable to a wireless router. I have a second PC (B) connected wirelessly to the router. Both computers have been assigned IP addresses by the router. Both PCs can successfully access the internet via the router. I want to share files between them. I can...

Second HD troubleshooting [ 1 Answers ]

Ok, here's the skinny... Intstalled my girlfriend's HD (Maxtor DiamondMax Plus 9 80GB ATA/133 HDD) onto my computer as a 2nd HD(slave). All jumpers are set correctly, all cables are correct (not the 1st time I've done this). Everything works fine, it's detected and I do have access to it. ...

View more questions Search