Sewer Plumbing

mghoit Posts: 1, Reputation: 1

New Member

Jul 6, 2007, 10:25 AM

Sewer Plumbing

How do I connect 3" PVC to 4" cast iron hub

iamgrowler Posts: 1,421, Reputation: 110

Ultra Member

Jul 6, 2007, 02:27 PM

You can use a Fernco CP-44, a short piece of 4"PVC and then a 4"x3" PVC reducing coupling.

Add your answer here.

Check out some similar questions!

Sewer smell [ 1 Answers ]

I recently noticed a sewer smell in my drain crock in the basement, also there is some kind of heavy growing fungus like stuff on walls of crock, my washer drains into this and I Use bleach in my wash and that hasn't killed it, It looks like I have a fungus type thing going on what should I do? I...

Sewer smell [ 1 Answers ]

I have a old house that was buit in 1950. When you run the water in the kitchen and bathroom a foul oder comes out of the sink drains. The kitchen and the rest of the plumbing in the house drains fine, I looked down the roof vent and I can see standing water at the bottom of the vent. Both...

Sewer Plumbing Issue [ 1 Answers ]

Several years ago, at great expense, we replaced our 60-year-old root-bound outside sewer line with PVC. That solved a good portion of our problems, but it they are not over. Our house has a sun room that was built on what used to be an outdoor porch with a textured concrete floor. Running for...

Plumbing sewer line [ 1 Answers ]

We purchased some property in Snowflake Arizona that has a bunk house. The plumbing was not completed for the bathroom toilet or sink. There will be no other plumbing. We currently do have a septic and well. We would like to run the pipe that is cut off just outside the house and then masked...

Sewer odor AFTER plumbing work done [ 11 Answers ]

We replaced our sink in tha fall and had trouble with it backing up all the time. We called a plumber and he rerouted our sink to the pipe in the basement that the washing machine is connected to. The old pipe was then removed and capped off. Soon after this we began having a serew odor in...