 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
John Deere L100 just stopped
Hello everyone,
I have an L100 that I take care of very well. I just put a new set of blades on for the third season and was out mowing today. After mowing, I was on my way to wash it down and put it away and it just stopped. It won't turn over anymore. The starter works just fine and the engine is not frozen. There is plenty of fuel and it is getting to the mower. None of the safety stuff is causing the problem. I still need to see if juice is flowing to the spark plug, but when I try to start it, it never turns over. Any other ideas? Thanks |
||||
|
||||
|
When You Say The Starter Works Fine, Then You Say That The Engine Will Not Turn Over, I Assume You Removed The Starter And Tested It . Well You May Have A Starter That Will Spin Over Freely When Off The Engine, But When It Has A Load Trying To Turn Over The Engine It Is Too Weak. You Can Get A Rebuild Kit For The Starter, But I Suggest Trying To Buy A New Or Used Starter At A Local Shop.
Have Your Starter Professionally Tested And Let Me Know. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I hit a rock with my mower ,now the blade won't engage.The blade and motor move freely and the belt is tight,but the clutch doesn't seem like it's engaging.I took the blade off ,but can't figyre out how to get the clutch assembly apart.Thie is a 3 year old John Deere JX75 HELP THANKS
John Deere tractor, L120, 3 years old. Tractor is shutting itself off after 45 minutes of use. It will restart only by keeping the choke and throttle wide open (to get myself back to my garage so I don't have to push it.) I THINK I eliminated a fuel problem, as I have blown out all fuel lines,...
I have a L100 John Deere that is leaking oil.. the oil is milky looking.. tractor's only a year old or so.. what can this be? Is there any way I can fix this myself? :confused:
I have a John Deere 318 with an Onan engine. When I try to move the mower it wants to die after the hydrostat safety switch is released. If I "tie" down the safety switch I can drive it, but it dies as I hit the mowing deck. Any hints on what to replace? Thanks, Rod Hite
Hi.my riding mower won't stay running.it will run fine for about five minutes then die,won't restart until it cools down after 30 minutes or so.I changed the coil,spark plug and have fresh gas in it.
View more questions Search
|
