 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Murray 42" Twin Select Briggs 42a707 16.5hp Motor OK, I am not on my mower at the moment, obviously, but I will post more model numbers and such this afternoon. History. 1. Wife picks house with monster lawn. 2. Wife pisses on my plan for a new riding mower. 3. Neighbor has pity and...
I bought an old Murray riding mower last year. I'm not sure what year it is, but here is my problem: One of the rear tires has a flat, instead of loading up the whole mower in the back of the truck, I wouldm like to remove the wheel. I removed the holding pin and the washer from the outside of the...
My mower surges and slows almost to stopping. Spark plug is new,oil changed and new air cleaner element.Fuel in tank is fresh and clean. There is no adjustments to be made to carberator. Old plug was fouled when removed. What should I do now? Remove carberator and check pick up to see if it is...
Hello , I have a murray 12 hp 30 riding mower . The first problem was it would start (turn over) . I brought an ignition switch and installed. The engine now turns over but not getting any spark (fire ) to the spark plug. I then jumped out the safety switches at each switch and changed out the...
I have a murray riding mower that I purchased in August of 1991. Apparently I need a new transaxle because it will not go in gear at all. The part # in the book is Dana model 4450-1 which I have been unable to locate, the only reference I have come across for the part says that it has been...
View more questions Search
|
