Check out some similar questions!
Ask a mechanical engineer a question
[ 4 Answers ]
I have 2 wheels and on each I have an 18 tooth sprocket run with a 40 chain. Each wheel and sprocket is connected to a main drive shaft with an 18 tooth double sprocket on it. The sprockets on each wheel are linked to the main drive shaft by a single strand ANSI 40 roller chain. One wheel is...
Ask a mechanical engineer
[ 0 Answers ]
I have a hobby of making coin rings by tapping a silver coin around its circumference edge with a small hammer while I turn the coin on top of an anvil to flatten the edge until it reaches a desired width and diameter. Then I cut the center out and polish it. I need advice or an idea to make this...
Mechanical & Electrical Engineer
[ 1 Answers ]
I have a assignment but don't know where to find the info. Anybody know please tell me, TQ! For each of the above professions, find out the following: (*the professions I have choose is 'Mechanical & Electrical Engineer') 1. A brief history, background and development of the profession in... View more questions Search
Add your answer here.
|