Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Leveling ground for an above ground pool
[ 2 Answers ]
I spoke to a pool company and they said that when installing an above ground pool you should "dish" the ground in the middle. This meaning that you make the ground in the middle of the pool 3 to 12 inches deeper than the rest of the ground. Everyone else that I have spoken to has said to level the...
Above ground pool in ground
[ 5 Answers ]
Can I put an above ground pool in a hole with about one foot of it sticking up? What do I do about water splashing out and washing away the back fill? What do I do about pluming and elec. Thanks
Install New Pool Liner-Above Ground Pool
[ 1 Answers ]
We are going to install a new liner in an above ground pool this weekend. I have read conflicting information as to when the skimmer and jet holes should be cut. Do you fill the pool with water within a foot of the skimmer, attach the trim kit and then cut out the liner? I don't know what to do,...
Need some feedback on a pool heating idea. Need suggestions.
[ 1 Answers ]
:confused: I have an idea to heat my swimming pool by using my oil run boiler in the house (system currenlty runs 4 heating zones, but has the capacity for 8)... if I do this, the pool would probably run off one of the existent zones or I would put in its own zone valve. I would like some opinions...
Need some feedback on a pool heating idea. Need suggestions.
[ 1 Answers ]
:confused: I have an idea to heat my swimming pool by using my oil run boiler in the house (system currenlty runs 4 heating zones, but has the capacity for 8)... if I do this, the pool would probably run off one of the existent zones or I would put in its own zone valve. I would like some opinions... View more questions Search
|