Check out some similar questions!
Maytag Dryer heat issue, lights flame and goes out in 20 seconds
[ 11 Answers ]
I pulled the high limit heat sensor wires off the top of the housing and connected the purple and red wire together and it works fine. I purchased a new sensor and installed it and same problem, flame goes out in about 15-20 seconds. Also replaced the two coils with brand new parts. Also...
Maytag Dryer Series 3000, Status Lights won't work. Any ideas?
[ 0 Answers ]
My Maytag dryer will run but the status lights are off. I cannot tell what it's running in but I assume it is the normal, dry cycle. It drys the clothes. It also has what looks like a 7 in the time box. The light is still on inside the dryer. Can anyone tell me what to do? Thanks. Melodie
Maytag Dryer gets new coil set lights igniter then nothing
[ 2 Answers ]
Maytag DG410 igniter lights then gas comes on but won't stay on , Replaced coil set but wires were not the same colors , so I matched the coils as they came out of the old coils ! The one coil clicks but no gas lights I know I have gas at the valve IT lit once before I changed the coils I may not... View more questions Search
Add your answer here.
|