 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I installed a thermostat for an gas furnace. The thermostat has the option of Gas or electric furnace. The selector jumper ( a black rubber like thing) need to be covering the electric or gas option?
To jump to call for heat the connection are red(24v) green(fan) orange (rev. valve) white w1(heat,2nd) brown w2(heat 3rd) yellow(cool) blue (common) whitch two is the jump
To jump to call for heat the connection are red(24v) green(fan) orange (rev. valve) white w1(heat,2nd) brown w2(heat 3rd) yellow(cool) blue (common) whitch two is the jump
Someone posted that their floppy drive was recognized but when trying to use, it says to insert floppy. I have the same problem and it was suggested to "remove CMOS jumper pin from Motherboard. I've never done this. Can someone please tell me where this is located or where an image might be...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
