 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
James Hardie RD-1200 sprinkler problem
When I first turned on my RD-1200 sprinkler system this summer none of the zones would work. I eventually determined that I have intermittent voltage to the MV terminal in the controller. In manual mode the main valve will actuate for a couple seconds and a zone will turn on for that couple of seconds but then shut back off. If I connect 24VAC directly to the MV terminal, the zones will turn on and run normally. Is it possible to repair this controller problem or should I purchase a new one? I
|
||||
Check out some similar questions!
I have a Rain Dial - James hardie Irrigation Controller. Exterior RD-1200 Problem the display reads "Open". What is the problem?
Hi I have a Rain Dial. It says James Hardie Irrigation... 4794 Other numbers I could find are... p/n HHA 11272. Where the clock is, the time keeps flashing... for a while. Ive changed the battery, it takes a 9 volt, but doesn't help. Any idea. Thank you. Im at... [email protected] Im giving...
Hi I have a Rain Dial. It says James Hardie Irrigation... 4794 Other numbers I could find are... p/n HHA 11272. Where the clock is, the time keeps flashing... for a while. Ive changed the battery, it takes a 9 volt, but doesn't help. Any idea. Thank you. Im at... [email protected] Im giving...
How do I set the irrigation system to run every other day.
I don't know the model #. The problem is 2 of the 3 zones are not working now. Please help.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
