Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cast iron shower drain in concrete floor-replacement
[ 7 Answers ]
Hello. This is my first post here and I'd appreciate any help you can provide. I have a tiled shower on a concrete slab. The drain is cast iron... sort of a bowl-shaped 3" dia. opening with a lead seal to a 2"-2 1/4" cast iron pipe. In removing the old "Premier" pull-up drain stopper, the brass...
Cast iron drain connection
[ 4 Answers ]
Hi, we have a house built in the ealy 50's. We've torn out a small tiled shower and want to replace with a new one that doesn't leak. We have a 2" cast iron drain pipe sticking 1 1/2 inches above the house slab. What is the best way to connect a new two piece drain before we build or install new...
Installing a PVC shower drain to cast iron
[ 5 Answers ]
Hi - I was wondering if you could tell me what type of adhesive I would need to attach my PVC drain to the cast iron pipe, below the shower. I have no plumbing experience and am trying to do this myself to save some $. Thanks! :) OJ Bean
PVC to Cast Iron Drain Mating
[ 1 Answers ]
What is the best way to mate a new 2" PVC drain into an existing 3" cast iron bell that is part of the 4"` cast iron vent stack. The previous arrangement was 2" galvanised into the bell, sealed with oakum and lead. I looked at the Fernco thick rubber gaskets but the cast iron bell seems a bit out...
Cast iron or PVC waste/drain pipes?
[ 5 Answers ]
Hi everyone. I'm in the middle of a major remodel to my 1947 home, including adding a second story. We're trying to do everything top-notch, which leads me to the experts here. Here's my question: For the waste/drain pipes, I know we want to use cast iron in the drops between the floors (for... View more questions Search
|