Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fan Blower not working in "ON" or "AUTO" in heat or AC
[ 13 Answers ]
Got home from the Brewer game this afternoon and noticed the house was warm(78). Outside was 91. I checked the T-stat and it was set correct. Noticed the air vents weren't blowing anything. Went outside and the condenser and fan was running fine. Then I went downstairs to the furnace unit to see...
Two parts: moving toilet over 4" and connecting to 4" black plastic to make shower
[ 3 Answers ]
Hi friends, I have a concrete slab foundation. In one full bath, I'm changing out the tub to put in a sauna tub, going from 60x30 to 60x32. The toilet is right next to the tub, so I want to move the toilet over at least 4" and change the sink to a pedastal sink to make room for the move for...
The blower doesn't start on "Auto"
[ 10 Answers ]
Please someone help me. My furnace Lennox G20Q3/4E-100-5 behaves as follows: 1) Fan is on "Auto" 2) Thermostat calls for heat 3) Green light comes "On" on IPI module and then burner comes "On" 4) Flame occurs 5) Blower doesn't come "On". After a while, the burner stops due to safety. It... View more questions Search
|