Ask Experts Questions for FREE Help !
Ask
    bworth2004's Avatar
    bworth2004 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 10, 2007, 06:40 AM
    Lost a part for my hampton bay ceiling fan.
    I am looking on how to get ahold of somebody to order a replacement part for my ceiling fan. I am looking for rubber pads that fit between the bracket and the motor.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Jun 10, 2007, 04:35 PM
    Hampton Bay parts have to be ordered from Hampton Bay, however you can use any similar piece of rubber or paper for these bushings.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?


View more questions Search